|
 |
Applying
shotcrete off a high lift! |
 |
This
is a close up view of a man with a nozzle filling an eight inch wire cage
with shotcrete. |
 |
This
photo shows the finish view after the shotcrete has been applied! |
 |
After the shotcrete was completed Hadrian tridi systems then applied
a final smooth finish coat. This was a mixture consisting of plastic
cement, silica sand and lime. The lime making the mix more workable.
The same mix is used on interior finishes on homes. Architectural
foam shapes were then applied by Hadrian tridi systems. Notice the
left over pieces of architectural foam at the base of the columns.
Scaffolding is now being removed! |
 |
Please
note the tremendous amount of weight being supported over the roof
of the building below. The building below also was built with the tridipanel system. |
